This troubleshooting guide provides solutions for potential issues encountered with the HiBREW H10A coffee machine.
HiBREW H10A Error Codes Explanation and Solutions
Error Code E-1:
The steam knob is open when the machine is powered on.
Solution: Switch the steam knob clockwise to turn off the steam.
Error Code E-2:
No water in the tank.
Solution: Fill the water tank with an appropriate amount of water. Then tap the brew button or turn on the steam wand; it should return to normal.
Error Code E-3:
Temperature sensor short circuit or open circuit detected.
Solution: Contact technical support for repair.
Error Code E-4:
Heating function failure detected.
Solution: Contact technical support for repair.
18 commenti
Larry
What should I do with E-4 error code?
اميره
الابره اللي في ساعة البار ماتتحرك اش المشكلة؟ وكيف اقدر اشغلها؟
علماً سويت اكثر من طريقة
Marek Głuszak
Do you repair HiBREW H10A espresso machines?
The machine operates, but it doesn’t switch to higher pressure after the pre-infusion phase. It could use a service/inspection.
Marek Głuszak, Poland
Peter Liu
I have a H10A and has been working great until now. The steam nozzle is leaking water and cannot completely shut off. I suspect that the steam valve is malfunction or valve seal failed. Is there a way to repair it? I need your answer before I buy another brand of espresso machine.
Miles
Had got this as a gift for Christmas, the coffee it self and the froth never got above Luke warm temperature, tried using today this morning and it just keeps showing a E-4 as a code, look it up and of course it’s a heating code.
Commenta
Questo sito è protetto da hCaptcha e applica le Norme sulla privacy e i Termini di servizio di hCaptcha.