This troubleshooting guide provides solutions for potential issues encountered with the HiBREW H10A coffee machine.
HiBREW H10A Error Codes Explanation and Solutions
Error Code E-1:
The steam knob is open when the machine is powered on.
Solution: Switch the steam knob clockwise to turn off the steam.
Error Code E-2:
No water in the tank.
Solution: Fill the water tank with an appropriate amount of water. Then tap the brew button or turn on the steam wand; it should return to normal.
Error Code E-3:
Temperature sensor short circuit or open circuit detected.
Solution: Contact technical support for repair.
Error Code E-4:
Heating function failure detected.
Solution: Contact technical support for repair.
6 commenti
Erick
My hibrew isn’t heating with a E-4 code. Please help. I bought the parts that were recommended to me by email, but they didn’t solve the problem.
Jacques Christian PUIG-MOUYSSET
Hello, I purchased a “Hibrew H10 A” on March 26, 2024, in Geekbuying Store, which is no longer under warranty. I suffered water damage, and following work on the pipes, the water was much more limescale-laden than usual, without me paying attention. This clogged the machine despite my attempts to descale it. Could you please send me where I can find the “complete exploded diagram of the Hibrew H10A?” I would be grateful. Best regards
Lee Sales
My H10A has developed a fault. When brewing hot water comes out of the steam want even when turned off, I can reduce this happening by turning the knob backwards and forwards a few times, later it happens again. Also, since this started happening ( within 6 months of purchase ) I noticed the brew pressure is a lot less. Does this sound like the steam valve? Thanx Lee
Rebecca Vigil
Having the same problem as Irfan Adil Majid above: I recently bought a SKU H10A Espresso Coffee maker. it does not give cream when I extract espresso and I also noticed that the pressure on the machine when it works is not high (just at the beginning of the green part of the pressure gauge). can you please sort my issue
John White
My machine isn’t working with a E-4 code. Please help.
Commenta
Questo sito è protetto da hCaptcha e applica le Norme sulla privacy e i Termini di servizio di hCaptcha.