This troubleshooting guide provides solutions for potential issues encountered with the HiBREW H10A coffee machine.
HiBREW H10A Error Codes Explanation and Solutions
Error Code E-1:
The steam knob is open when the machine is powered on.
Solution: Switch the steam knob clockwise to turn off the steam.
Error Code E-2:
No water in the tank.
Solution: Fill the water tank with an appropriate amount of water. Then tap the brew button or turn on the steam wand; it should return to normal.
Error Code E-3:
Temperature sensor short circuit or open circuit detected.
Solution: Contact technical support for repair.
Error Code E-4:
Heating function failure detected.
Solution: Contact technical support for repair.
1 comment
Irfan Adil Majid
I recently bought a SKU H10A Espresso Coffee maker. it does not give cream when I extract espresso and I also noticed that the pressure on the machine when it works is not high (just at the beginning of the green part of the pressure gauge). can you please sort my issue
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.